Sign In Join Help
 
Zhuzhou Up Cemented Carbide Co.,Ltd

 
 
Recommended Results 
 
tungsten carbide water-jet nozzle 

  Category : Machinery on-line->Hardware & Hand tool->Hand tools->cutting tools

     
tungsten carbide water-jet nozzle
 
 
       

  Product Specification
 
  Model No:      OD7.14*ID1.02*76.2
  Country  CN
  Brand  zzup
  Materials  tungsten carbide
  Size  OD7.14*ID1.02*76.2  millimeters  
  Weight  44g
  Color  grey or gold
  Packing  alone package
  Minimum Order  2pcs
  Payment Term  TT,WU,PAYPAL

 

    Product Detail
  tungsten carbide water-jet nozzle,also name tungsten carbide water cutting,tungsten carbide sand tube.it is mainly using to cutting metal,ceramic,stone,glass or other materials.
1.100% fresh material,we also coating tantalum tin for higher wear resistance.
2. the common sizes are 6.35,7.14,7.6,9.45 ect.
3. long life,the hardness up to 96.5HRa,execellent wear resistance.
4. also product according your sizes.
1. Refers to the high pressure abrasive water jet machine tool jet exit is used as the abrasive nozzle is mixed
withwater.Because of its internal Jet conditions are harsh, the abrasive wear was accelerated after the sand
inside the tube is very large, so need to use very wear-resisting material.Materials for manufacturing, sand
tube structure is very simple,basically consists of two sections, and a cone entrance and columnar exports.
Due to the different USES its size slightly difference.

2. The use of ultra-high pressure technology can turn ordinary tap water pressure to 250 ~ 400 mpa pressure,
and then through the inner hole diameter to 0.15 ~ 0.35 mm ruby nozzle spray forming speed is about 800 ~
1000 m/s high speed jet, commonly known as it is Water arrows, if arrow has the very high energy, can be used
to cut soft materials.If we add right amount ground in water arrows Material can be used to cut almost all hard
and soft materials.Adjust the water jet pressure and flow, can use its various cleaning objects, such as glue,
paint, rust removal, etc., we can also use for high pressure sterilization of ultra-high pressure technology, food
preservation, etc Many beneficial to human work.

3. The nozzle and sand tube not to cause the premature wear of pipe, in order to prolong the service life of the
sand tube, before use, first with sand tube with water, ensure that the water in the center position.Rotary sand
tube will increase to 120 degree of wear and tear.Should pay attention to the following three questions:
(1) the gem (diamond) have tube to the nozzle from the sand.
(2) check whether there is new gems (diamond) nozzle hole.
(3) the room appear mixed sand abrasion.
If there is no on the jet, jet will directly impact the tube wall, led to the decrease of the cutting speed, at the
sametime, sand tube service life will be dramatically reduced.Normal sand tube wear an from inlet to outlet
of centripetal and continuous wave wear trace.

   


[ Back Products Catalog ]

Commerce Member:
Please log in your ID and password, we will later fill in relating info.
 
ID: Password: Remember my ID on this computer
Complete this form below to send out your enquiries.
All enquiries will be automatically sent to the company you want to develop.
Subject
Content (Don't input Company Name, E-Mail, Phone Number, Fax Number, and URL)
   

 


Company Profile:
* Company Name
*E-mail
*Country
*Contact Person
URL
*Phone
- -
Fax
- -
*Postal code
*City
*Street Address
*Business Nature
Distributor   Exporter Importer Manufacturer
Whole Sale Retailer  Reseller Retrofitter User
Others, please specify:
*Security Code
Enter the security code.


Site Map l   Privacy Policy l Company Profile l Corporate Proposal l Contact Us l Help l Advertise With Us l  World Trade Link
    .